Installation guide

Digital Monitoring Products SCS-1R Installation Guide
26
Printout ExPlanations
Printout Explanations
General Description
Note: UL central station applications must use a serial printer listed for Fire Protective Signaling Systems.
The SCS-1R prints out two general types of messages: changes in the system information and messages received
from DMP Command Processor panels. The message line for system changes is bracketed by double asterisks
with the time of occurrence printed at the far right. Messages from panels always list the account number rst
followed by the message and the time of occurrence. The printout below is a typical page from an Activity Log.
ATLAS SECURITY SERVICE, INCORPORATED
Wednesday 5/1/03 * * ACTIVITY LOG * * Page number: 2
* * * * RICK SIGNED ON * * * * 7:58 a.m.
* * OPERATOR: PAT LEVEL: 8 ADDED TO OPERATOR CODES. * * 7:59 a.m.
* * OPERATOR: DAVE LEVEL: 9 CHANGED TO LEVEL: 5. * * 7:59 a.m.
* * SECURITY CONTROL SYSTEM NUMBER CHANGED TO: 1. * * 8:01 a.m.
* * LINE: 3 CONFIGURED AS: DD PHONE NUMBER: [phone] * * 8:02 a.m.
* * DIALER PANEL NUMBER: 108 ADDED TO LINE: 1 * * 8:04 a.m.
* * * * RICK SIGNED OFF * * * * 8:07 a.m.
1- 1 Zone: 8 FRONT DOOR - BURG ALARM 8:18 a.m.
1- 1 Zone: 2 BACK DOOR - BURG TROUBLE 8:23 a.m.
1- 1 Zone: 2 BACK DOOR - BURG RESTORE 8:24 a.m.
1- 1 * * AMBUSH * * 8:27 a.m.
1- 1 Area: 1 OFFICE - DISARMED Usr: 007 8:31 a.m.
2 PLANT
3 SHIPPING
1- 1 Zone: 010 FRONT DOOR - BYP Usr: 015 8:33 a.m.
1- 1 Usr: 009 added to panel Usr: 002 8:33 a.m.
1- 1 Permanent schedule for Tuesday Area: 1 8:35 a.m.
Open: 8:00 a.m. Close: 5:30 p.m. Usr: 005
1- 1 Door access Dr: 001 Usr: 021 8:36 a.m.
1- 1 WARNING: Low standby battery 8:38 a.m.
1- 1 Zone: 37 SMOKE DET. - FIRE ALARM 8:40 a.m.
System Messages
System messages are provided on the Activity Log printer to provide a permanent record of changes made to the
system information. The operator making the change is determined by referring to the last sign on.
Operator Signon
This message prints after an operator enters their code number to access the system menu. The name of the
operator and the sign on time print. The operator code number does not print.
Time/Day/Date
When the time, day, or date is changed, the old and the new values print.
Operator Codes
When a new operator is added to the system, the operator name and level print. Any time a current operator is
deleted from the system a similar message prints. When only the operator level is changed, the old level and the
new level print.
System Number
When the system number is changed, the new system number prints.
Telephone Line Conguration
Each time a change is made to any part of a line conguration, all parts of that conguration print. This message
displays in a 2-line format.
Command Processor Messages
Messages from Command Processor panels are sent to the SCS-1R advising of various changes in the panel status.
The messages print and/or display on the LCD.