Installation guide

SCS-1R Installation Guide Digital Monitoring Products
25
OperatOr’s Guide
GMT City/Time Zone GMT City/Time Zone
0 London, Monrovia, Lisbon, Dublin, Casablanca, Edinburgh 13 New Cadelonia
1 Cape Verde Island, Azores 14 Guam, Sydney
2 Mid-Atlantic, Fernando de Noronha 15 Tokyo, Seoul
3 Buenos Aires, Georgetown, Brasilia, Rio de Janeiro 16 Hong Kong, Singapore
4 Atlantic Time (Canada), Caracas, La Paz, Santiago 17 Bangkok, Hanoi
5 Eastern Time (US, Canada) Bogota, Lima, Arequipa 18 Dhaka, Almaty
6 Central Time (US, Canada), Mexico City, Saskatchewan 19 Islamabad, Karachi
7 Mountain Time (US, Canada), Edmonton 20 Abu Dhabi, Kazan
8 Pacic Time (US, Canada), Tijuana 21 Moscow, Bagdad
9 Alaska 22 Eastern Europe
10 Hawaii 23 Rome, Paris, Berlin
11 Midway Island, Samoa
12 Fiji, Marshall Island, Wellington, Auckland, Kwajalein, Kamchatka
DIALER LINE CARD
MONITOR? NO YES
Dialer Line Card Monitor
Press the far right Select key for YES to enable monitoring of all SCS-100 digital dialer
line cards for any failed communication attempts. A failed communication attempt
occurs when the line card goes off hook but does not successfully communicate with a
panel. Refer to S61-S65 messages in the Appendix. Press the middle right Select key for
NO, to disable the line card monitoring operation. Default is NO.
When enabled, and a line card communication fails, a message, S61 through S65 (Line
1-5 respectively), is sent to the host automation computer, SCS-1R printer and LCD
display. Manual acknowledgement is required when the SCS-1R is not successfully
communicating with the host automation computer.
Exit Menu
Exit Menu allows you to properly end programming and exit the menu.
SCS-1R MENU
EXIT MENU
Exit Menu
Press any top row Select key to exit the SCS-1R menu. This automatically logs the
operator off.