User`s manual

PMX-089T DM&P Vortex86MX Panel PC with 8.9” WSVGA TFT LCD
22
3.1. PMX-089T Development Note
<Primary /Secondary IDE: Master or Slave>
Micro SD: Primary Master
CF Slot: Secondary IDE: Master or Slave (User can use slide switch (in side of CF
slot) to adjust Master or Slave
<Window CE6.0 development guide>
Windows Embedded CE 6.0 BSP, trial CE image and development notes, please visit
technical website to get more information:
www.compactpc.com.tw
<Linux installation note>
Please forced the IDE setting in BIOS to PIO mode before install Linux
on PMX-089T as follows:
1-Go to the advanced BIOS setting and make the “Onboard IDE Operate Mode” is
“Legacy Mode”
2-Go to the PCI/PnP and make the “PCI IDE BusMaster” is “Disable"
< XP professional /Home /Embedded and Windows 2000 installation note >
1-Please visit technical website to get more information:
www.compactpc.com.tw
<Enhance CF to run the UDMA2/4>
1-Please select
DMP “ICF Card” to supporting UDMA 2/4 Mode.
<How to boot up from the Micro SD card>
1-Get into the BIOS setup Utility
2-Go to the Advanced
3-Choose Primary IDE Pin Select: SD card
4-Press “F10” to save configuration changes and exit setup