User manual

PCM-3343 User Manual 28
To Establish Password
1. Choose the Set Password option from the CMOS Setup Utility Main Menu and
press <Enter>.
2. When you see Enter Password, enter the desired password and press
<Enter>.
3. At the Confirm Password prompt, retype the desired password, then press
<Enter>.
4. Select Save to CMOS and exit, type <Y>, then <Enter>.
To Change Password
1. Choose the Set Password option from the CMOS Setup Utility main menu and
press <Enter>.
2. When you see Enter Password, enter the existing password and press
<Enter>.
3. You will see the Confirm Password prompt, type it in again, and press <Enter>.
4. Select Set Password again, and at the Enter Password prompt, enter the new
password and press <Enter>.
5. At the Confirm Password prompt, retype the new password, and press
<Enter>.
6. Select Save to CMOS and exit, type <Y>, then <Enter>.
To Disable a Password
1. 1. press <Enter>.
2. When you see the Enter Password prompt, enter the existing password and
press <Enter>.
3. You will see Confirm Password, type it in again, and press <Enter>.
4. Select Set Password again, and at the Enter Password prompt, DO NOT
enter anything - just press <Enter>.
5. At the Confirm Password prompt, again, DO NOT type in anything - just press
<Enter>.
6. Select Save to CMOS and exit, type <Y>, then <Enter>.