User manual

PCM-3343 User Manual 26
3.2.6 PnP/PCI Configurations
 Reset Configuration Data [Disabled]
This item allow a user to clear any PnP configuration data stored in the BIOS.
 Resources Controlled By [Auto (ESCD)]
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-9, 10,
11, 14, and 15.
– DMA Resources
This item allows you respectively assign a DMA for 0, 1, 3, 5, 6, and 7.
 Assign IRQ For VGA [Enabled]
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
 PCI IRQ Actived By [Level]
The item allows users to choose level or edge.
Note! The "PnP/PCI Configurations" screen sets up the IRQ and DMA (both
PnP and PCI bus assignments).