User manual
PCM-3343 User Manual 24
Summary Screen Show [Disabled]
Show all Motherboard information on POST.
3.2.4 Advanced Chipset Features
PDX-600 IO Config [Press Enter]
This item allows a user to set Vortex86DX SOC UART resources.
PDX-600 PowerDown Setting [Press Enter]
This item allows a user to set LAN1 powerdown function.
SMI712 VGA Setting [Press Enter]
This item allows a user to set VGA related features.
ISA Configuration [Press Enter]
This item allows users to config ISA resources & IO/MEM wait state.
USB Device Setting [Press Enter]
This item allows users to set USB related features.
PDX-600 IDE Legacy mode [Legacy Mode]
This item enables Vortex86DX SOC IDE as legacy or native mode.
PDX-600 PXE ROM [Disabled network boot]
This item allows a user to enable LAN1 PXE boot function.
LAN2 Control [Enabled]
This item is enables or disables the onboard LAN2 controller.
Note! The "Advanced Chipset Features" screen controls the configuration of
the board's chipset register settings and performance tuning - the
options on this screen may vary depending on the chipset type. It is
strongly recommended that only technical users make changes to the
default settings.
Note! Please set PDX-600 IDE Legacy modec to [Native Mode], While you
install Window XP or Window XP embedded.