User`s guide

Digital Monitoring Products ePAD Programming Guide
10
ePAD User Options Page
The ePAD allows one User Name and one User Password for connecting to the ePAD. Program User Names and User
Passwords in the User Options Page. Select “strong” passwords: Use combinations of letters and numbers. Passwords
are not case-sensitive.
If you do not want to use a User Name and Password when logging onto the ePAD, leave the elds in the User
Options page blank. If these elds are left blank during programming, you are not prompted to enter a User Name or
Password when you log onto the ePAD.
User Name
Enter one User Name consisting of 3 to 16
alphanumeric characters. Do not use spaces or
special characters, such as exclamation points and
hyphens. The default User Name is new.
New User Password
Enter one User Password consisting of 3 to 16
alphanumeric characters. Do not use spaces or
special characters, such as exclamation points and
hyphens. The default User Password is new. The
password displays as asterisks. If a User Name is
entered but a User Password is not, the password
defaults to new.
Conrm User Password
Enter the password again. Be sure both entries match or you will have to retype the password and the
conrmation. Click Submit to save the new password. Click Reset to revert to the current password.
ePAD Administrator Options Page
The ePAD allows one Administrator Name and one Administrator Password, which are programmed in the
Administrator Options Page. When selecting passwords, select “strong” passwords. Passwords are not case-sensitive.
Administrator Name
Enter one Administrator name consisting of 3 to
16 alphanumeric characters—A through Z, 0 (zero)
through 9. Do not use spaces or special characters.
The default Administrator Name is admin.
New Administrator Password
Enter one Administrator Password consisting of 3 to
16 alphanumeric characters—A through Z, 0 (zero)
through 9. The default Administrator Password
is admin. When you return to this screen, the
password displays as 12 asterisks.
Conrm Administrator Password
Enter the password again. Be sure both entries
match or you will have to retype the password and the conrmation. Click Submit to save the new password.
Click Reset to revert to the current password.
Note: If the User Name and Password are the same as the Administrator Name and Password, the ePAD does
not require a separate log on. For example, the User Name and Administrator Name are both programmed
as Bill. The User Password and Administrator Password are both programmed as Mobile. If Bill logs onto the
Administrator screen and then switches to use the ePAD, the ePAD does not require Bill to enter his User Name
and Password.
Figure 10: ePAD User Options Page
Figure 11: ePAD Administrator Options Page