DM&P Group eBox-4 Series Manual (Revision 1.
COPYRIGHT The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may contain in this document, and makes no commitment to update or to keep current the information contain in this manual.
TRADEMARKS ACKNOWLEDGMENT eBox-4800, eBox-4850, eBox-4851, eBox-4852, eBox-4853 and eBox-3854 are the registered trademarks of DMP Electronics Inc. Microsoft®, Windows® and AMI are registered trademarks of Microsoft Corporation and American Megatrends, Inc. in the United States and/or other countries respectively. Other brand names, product names or trade names appearing in this document are the properties and registered trademarks of their respective owners.
SAFETY INFORMATION WARNING Do not expose your computer to rain or moisture, in order to prevent shock and fire hazard. Never install your computer in wet locations. Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for qualified personnel servicing. Never touch un-insulated terminals or wire unless your power adaptor and display monitor are disconnected.
REGULATORY FCC CLASS A NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PURCHASE AGREEMENT Version 1.1 – 2002/11/19 PURPOSE: In accordance to the general commercial conduct of Trust and Fair Trade, herewith below is the agreement for the protection for both parties, DMP and Users in pursuant of trading. PRODUCT DESCRIPTION : With this product, herewith also known as eBox-4, which is a simplified & an economical design of an embedded computer for Special Purpose Personal Computing.
Table of Contents CHAPTERS – HEADING PAGE NO. 0 – UNPACKING YOUR EMBEDBOX ......................................................... 1 ` PACKING LIST ............................................................................... 1 ` CHECK BEFORE USE ..................................................................... 1 1 – PREFACE ........................................................................................ 2 2 – eBOX-4800 OVERVIEW ..............................................................
APPENDIX : ONBOARDCONNECTORS SUMMARY ..................................... 15 ` REAR CONNECTORS OUTLINE FOR eBOX-4800 .......................... 15 ` REAR CONNECTORS OUTLINE FOR eBOX-4850 .......................... ` REAR CONNECTORS OUTLINE FOR eBOX-4851 .......................... ` REAR CONNECTORS OUTLINE FOR eBOX-4852/53 ..................... ` REAR CONNECTORS OUTLINE FOR eBOX-4854 .......................... 15 16 16 17 ` PIN ASSIGNMENTS ..................................................................
0 UNPACKING YOUR EBOX Congratulation! You have just acquire eBox-4, the world’s smallest and compact PC (See Figure 1), please check the following items: PACKING LIST FOR eBOX-4 SERIES Item Description Q’ty c d eBox-4 Max. 20-watts External Power Adaptor, Vin: 100~240VAC • 60/50Hz, 1.0A / Vout:: +5.0~5.25VDC @ 4A max. LPS Drivers CD for eBox-4 User’s Manual x1 x1 e f x1 x1 * Note: The accessories are subject to change without immediate notice.
1 PREFACE eBox-4 : SLIM, MINI BUT POWERFUL COMPUTER DMP introduces an industrial classic in the computing industry, by featuring eBox-4, a chef d’oeuvre compact PC that connects people through networking via global internet across the continents over the channels of sea bay. The conquest for browsing einformation through wired LAN/WAN. This portable device is handy for travelers and service technicians who worked in and out of the office.
2 eBOX-4800 OVERVIEW Front Panel Power LED The power LED lights up, when system is turn on. HDD LED The HDD LED flashes when the system is working. Please do not turn off the system when HDD start running Power Switch Depress switch to turn on & turn off the systems. USB port For connection to devices with USB interface (keyboard, mouse, HDD, CDROM, Memory Stick, etc.
eBOX-485x Overview Front Panel Power LED The power LED lights up, when system is turn on. HDD LED The HDD LED flashes when the system is working. Please do not turn off the system when HDD start running Power Switch Depress switch to turn on & turn off the systems. USB port For connection to devices with USB interface (keyboard, mouse, HDD, CDROM, Memory Stick, etc.
3 ABOUT EMBEDDED CPU BOARD SYSTEM SPECIFICATION CPU VIA Esther 1.2GHz North/South Bridge VIA CX700M Main Memory 512MB DDR2 BIOS “Plug and Play” function, auto-search new apparatuses inset. Provide DMI for system management. Advanced ACPI configuration and power control interface. （ intelligence control system.） VGA AGP Rev.2.0 Compliant Resolution up to 1920x1440 Audio AC97 CODEO, Fully Compliant with AC97v2.
4 PERIPHERALS CONNECTING THE POWER ADAPTOR Power Adaptor To use your computer immediately, take and use the supplied AC adapter as a power source. See the left diagram for visual connection. Connect the DC power jack of the power adaptor to the DC Input jack of eBox-4. Turning ON Your Computer Press the power button as indicated on the figure on your left-side, the system will start automatically.
PERIPHERALS CONNECTING THE USB eBox-4 provides USB port (one each in front & at the back of the cabinet). Front cabinet Turning ON Your Computer Press the power button as indicated on the figure on your left-side, the system will start automatically. CONNECTING USB, SPEAKER/EARPHONE AND WEB USB Port The second USB port is available for connection to USB devices.
CONNECTING THE KEYBOARD AND MOUSE Describing Mouse actions Description Action Point - Click Right-click - Scroll wheel - Double-click Slide and point your mouse to your desired position. Press the left button once. Press the left button twice. Press the right button once. When selecting (most) programs, this action displays a shortcut menu of the contextsensitive choices.
5 BIOS RECONFIGURING eBox-4 1. 2. 3. 4. Take note that AMI BIOS is used in the eBox-4. To reconfigure the computer, depress or hit the key to enter your BIOS setup main menu. Select from the menu, the desired setup for change. Press to go back to main menu. Move your cursor to “Save Settings and Exit”, press “Y” to save the changes that you just made. eBox-4 will restart accordingly to your new setup.
6 TECHNICAL SPECIFICATION Features CPU BIOS System Chipset I/O Chip System Memory Expansion I/O MIO USB Compact Flash Slot Mini PCI Socket Display Chipset Description VIA Esther 1.2GHz AMI BIOS VIA CX700M VT1211 Onboard 512MB DDR2 1x X-PCI connector EIDE (Ultra DMA 133), 1x PS/2 K/B and Mouse Print and RS-232 Port USB 2.
7 TAKING CARE YOUR COMPUTER This section gives you guidelines on using eBox-4 computer – Safe using, Storing and Handling.
USING CABLES FOR CONNECTION To avoid problem, use only the specified interface cables in your accessory bag. The supplier will not be responsible for the connection arising from the other unspecified peripheral equipment. Do not use cut or damaged cables for connection. CLEANING YOUR COMPUTER Clean the computer with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution.
8 TROUBLESHOOTING This section describes the techniques of resolving some basic problems that you encounter when using your computer. For more troubleshooting guidelines, please contact your nearest dealer for technical support. TROUBLESHOOTING YOUR EMBEDBOX A. Computer does not start Make sure the computer is properly secured and plugged into a power source before it is turned on. Make sure the power indicator shows the power is on.
2. Go to “Auto Configuration with Optimal Settings” using the “Sel” keys <↑↓>, then press . A message dialog appears as seen below, hit “ Y ” key and press to save and recover the factory setting. “Load high default settings (Y/N)? N ” C. “Operating System Not Found” – A message indicating that “Operating system not found” appear when my computer starts (Windows won’t start) Enter your BIOS setup main menu by pressing key, be sure that your C: drive is enable.
` REAR CONNECTORS OUTLINE FOR eBOX-4800 DC Power Jack Power Switch PS/2 Mouse PS/2 Keyboard LAN USB Mic In VGA Line-Out ` REAR CONNECTORS OUTLINE FOR eBOX-4850 DC Power Jack Power Switch eBox-4 PS/2 KB / MS Printer Port LAN Mic In Line Out Serial Port 15
` REAR CONNECTORS OUTLINE FOR eBOX-4851 DC Power Jack Power Switch PS/2 KB / MS LAN Printer Port Mic In Line Out Compact Flash slot ` REAR CONNECTORS OUTLINE FOR eBOX-4852/4853 DC Power Jack Power Switch eBox-4 PS/2 KB / MS Printer Port LAN Compact Flash Slot Mic In Line Out 2nd LAN 16
` REAR CONNECTORS OUTLINE FOR eBOX-4854 DC Power Jack Power Switch eBox-4 PS/2 KB / MS Compact Flash Slot LAN Mic In Line Out USB Ports 17
` PIN ASSIGNMENTS KBD(PS/2Keyboard & Mouse) – 6-pin Mini-Din Connector Pin # Signal Name 1 KBCLK 2 PMCLK 3 GND 4 KBDAT 5 PMDAT 6 SB5V 7 GND 8 GND 9 GND Mouse (PS/2 Mouse) – 6-pin Mini-Din Connector Pin # Signal Name 1 PMCLK 2 NC 3 GND 4 PMDAT 5 NC 6 SB5V 7 GND 8 GND 9 GND RJ-45 FOXCONN (LAN)– RJ45 Connector Pin # Signal Name 1 FTXD+ 3 FRXIN+ 5 NC 7 NC eBox-4 Power Sw – Push Button Switch Pin # | O --- Status ON OFF --- DC-IN (DC-IN 5V) – 3-pin MINI-DIN Lock Pin Socket Pin # Signal Name 1 J23-pin 1 & 2
` PIN ASSIGNMENTS VGA – 15-pin Dsub Connector Pin # 1 2 3 4 5 MIC_IN – 5-pin RCA Phone Jack Pin # 1 2 3 4 5 Signal Name MR MG MB NC GND Signal Name GND MIC1 Open Touch Open Touch VREFOUT Signal Signal Pin # Name Name 6 GND 11 NC 7 GND 12 VCC 8 GND 13 HYSYNC 9 NC 14 VSYNC 10 GND 15 VCC USB (USB2): For connection to external USB device –4-pin USB Type 1 Connector (H) Signal Pin # Name 1 VCC 2 USB23 USB2+ 4 GND 5 NC 6 NC Pin # Power – Push button Action Status LEDS: POWER ON/OFF & HDD R/W LED State Colo
WARRANTY TERMS AND CONDITIONS 1. Warranty The warranty terms for eBox-4 is twelve (12) months from the beginning on the date of invoice. During the warranty period, DMP Electronics Inc Will repair replace the product covered under this limited warranty. 2. Service and Support DMP Electronics Inc provides the technical support for hardware problems with your system throughout the warranty period. The technical support service is limited to configuration and operation of eBox-4 sold by DMP Electronics Inc.
MEMO eBox-4 21
