User`s manual

eBOX-3350MX

ERMS AND CONDITIONS

1. Warranty

The warranty terms for eBOX-3350MX series are twelve (12) months from the

beginning on the date of invoice. During the warranty period, DMP Electronics Will

repair replace the product covered under this limited warranty.

2. Service and Support

DMP Electronics Inc. provides the technical support for hardware problems with your

system throughout the warranty period. The technical support service is limited to

configuration and operation of eBOX-3350MX series sold by DMP Electronics Inc. The

technical support service does not offer software tutoring or training.

3. Return Merchandise Authorization（RMA）policy

If the DMP staff or dealer determines that a part is defective. Purchaser must call our

technical support service to obtain an RMA number before attempting to return any part.

Please refer to your nearest dealer for

To obtain an RMA number, Purchaser must follow procedures as below：

1. Complete the DMP Electronics Inc. standard RMA Form and fax back to the RMA

Department.

2. The RMA Number must be used within 7 DAYS

3. The RMA Number must be shown clearly on your shipping label.

4. DMP Electronics Inc. must receive all Returns before a replacement will be sent.

5. The repair cost is depends on the parts, the damage reasons, and whether under

warranty period…etc. The Seller will charge the Purchaser in a reasonable price.

6. A copy of the invoice for the RMA product(s) will also be shipped to Purchaser.

7. The freight of return to DMP Electronics Inc. is charges to Purchaser account and

accompanied by an RMA number. Any Returns with freight collect will be refused and

returned to you. After Repairing, the cost of freight will be paid by Seller.

8. DMP Electronics Inc. must receive all returned goods within the warranty period.

4. Shipping Policy

The Purchaser must pre-pay shipping for any defective system or parts returned under

the warranty. DMP Electronics Inc. shall not be liable for risk of loss or damage during

shipment of your returned system or parts if you fail to insure the shipment.

All products must be shipped back to DMP Electronics Inc. in original or equivalent

packaging. DMP Electronics Inc. will ship the repaired or replacement product(s) to

Purchaser by freight prepaid. Purchaser assumes the risk of loss. DMP Electronics Inc.

shall not be responsible for failure of the delivery service to make on-time delivery.

ARRANTY