eBOX-3350MX/3350MX-AP Series User’s Manual
COPYRIGHT The information in this manual is subject to change without notice for continuous improvement in the product. All rights are reserved. The manufacturer assumes no responsibility for any inaccuracies that may contain in this document, and makes no commitment to update or to keep current information contain in this manual.
TRADEMARKS ACKNOWLEDGMENT The eBOX-3350MX/eBOX-3350MX-AP is the registered trademarks of DMP Electronics Inc. Microsoft®, Windows®, and AMI are registered trademarks of Microsoft Corporation and American Megatrends Inc. in the United States and/or other countries respectively. Other brand names, product names or trade names appearing in this document are the properties and registered trademarks of their respective owners. All names mentioned herewith are served for identification purpose only.
SAFETY INFORMATION WARNING Do not expose eBOX-3350MX to rain or moisture, in order to prevent shock and fire hazard. Never install eBOX-3350MX in wet locations. Do not open the cabinet to avoid electrical shock. Refer to your nearest dealer for qualified personnel servicing. Never touch un-insulated terminals or wire unless your power adaptor and display monitor are disconnected.
REGULATORY FCC CLASS A NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PURCHASE AGREEMENT PURPOSE: In accordance to the general commercial conduct of Trust and Fair Trade, herewith below is the agreement for the protection for both parties, DMP and Users in pursuant of trading. PRODUCT DESCRIPTION: With this product, herewith also known as eBOX-3350MX/eBOX-3350MX-AP, which is a simplified & an economical design of an embedded device for Special Purpose Personal Computing.
Table of Contents CHAPTERS – HEADING PAGE NO. 0 – UNPACKING YOUR EBOX ................................................................ 1 ` PACKING LIST ............................................................................. 1 ` CHECK BEFORE USE ................................................................... 1 1 – PREFACE ...................................................................................... 2 2 – eBOX-3350MX OVERVIEW ...........................................................
APPENDIX : ONBOARD CONNECTORS SUMMARY ................................... 13 ` SUMMARY TABLE FOR CPU BOARD ............................................ 13 ` FRONT CONNECTORS OUTLINE FOR eBOX-3350MX/3350MX-AP ... 13 ` REAR CONNECTORS OUTLINE FOR eBOX-3350MX/3350MX-AP 14 ` PIN ASSIGNMENTS ................................................................ 15-16 ` HOW TO USE 75 X 75MM TO 100 X 100 MM VESA MOUNT RACK 17 WARRANTY : TERMS AND CONDITION ...................................................
0 UNPACKING YOUR EMBEDBOX Congratulation! You have just acquired eBOX-3350MX, please check the following items: PACKING LIST FOR eBOX-3350MX VESA PC SERIES Item No. 1 2 Description eBOX-3350MX or eBOX-3350MX-AP Mini PC 75 x 75mm to 100 x100mm VESA mounting rack (Optional) Q’ty x1 x4 * Note: The accessories are subject to change without immediate notice.
1 PREFACE eBOX-3350MX/3350MX-AP VESA PC The eBOX-3350MX is a revolutionary device which is especially designed for limited physical space and temperature concerns. No matter you are in a jammed office, a crowded place, or public transportation, it can be easily integrated with a VESA LCD to bring you eBOX-3350MX access at any time. It can attach to any VESA mounting fixture; allowing it to be securely mounted onto desks, walls, or buildings, and thereby optimizes your work area.
2 EBOX-3350MX/3350MX-AP OVERVIEW Front Panel Power LED The power LED lights up when system is turn on. USB v2.0 ports For connection to devices with USB interface (HDD, CD/DVD-ROM, Memory Stick, etc.) eBOX-3350MX-AP (Auto Power On) Audio Line Out Audio output to speaker Audio Mic In For Microphone Input SD Slot This system is bootable from SD card.
3 EMBEDDED CPU BOARD SYSTEM SPECIFICATION CPU Peripheral MSTI-PMX-1000 1. USB V2.0 (host) x 3 (System on Chip) 2. Audio (Mic In, Line Out) 3. SD slot x 1 Main Memory 512MB DDR2 (16-bit DRAM bus ) Dimension & Weight 95 x 95 x 20 mm / 277g BIOS AMI BIOS Operating System Supported Suitable for: VGA Resolution up to 1600 x 1200 High Colors Windows XP Home/Pro.
4 PERIPHERALS CONNECTING THE POWER ADAPTOR Mini USB Power Jack To use eBOX-3350MX immediately, please attach the power adapter for the power source. See the left diagram for visual connection. Connect the DC power jack of the power adaptor to the DC Input of eBOX3350MX/3350MX-AP. Turning ON eBOX-3350MX Switch on power as indicated on your left-side figure, the system will be start when you press the Reset button on the front.
PERIPHERALS CONNECTING THE USB AND SPEAKER/EARPHONE eBOX-3350MX provides USB ports with (Two in the front & one at the back). Front cabinet Microphone/Earphone The eBox-3350MX supports Microphone Input and Speaker Output Reset Button For system reset or turn on *Note: Model type with Auto Power On feature has Reset Button Eliminated. SD Slot For booting device by SD Card and Micro-SD (T-flash).
5 BIOS RECONFIGURING eBOX-3350MX 1. 2. 3. 4. 5. Take note that AMI BIOS is used in the eBOX-3350MX. To reconfigure the eBOX-3350MX, depress or hit the key to enter your BIOS setup main menu. Select from the menu to the desired setup for change. Press to go back to main menu. Press to load factory default setting Move to “Exit” TAB and select “Save Settings and Exit”, press “Y” to save the changes that you just made. eBox-3350MX will restart accordingly to your new setup.
6 TECHNICAL SPECIFICATION Features Description CPU MSTI PMX-1000 BIOS AMI BIOS System Memory Onboard 512MB DDR2 I/O MIO USB 1 x SD slot 1 x RJ-45 Ethernet Connector 3 x USB v2.
TAKING CARE OF YOUR EBOX-3350MX 7 This section gives you some guidelines on using eBOX-3350MX – Safe using, Storing and Handling.
USING CABLES FOR CONNECTION To avoid problem, use only the specified interface cables in your accessory bag. The supplier will not be responsible for the connection arising from the other unspecified peripheral equipment. Do not use cut or damaged cables for connection. CLEANING YOUR VESA PC Clean the eBOX-3350MX with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution.
TROUBLESHOOTING 8 This section describes the techniques of resolving some basic problems that you encounter when using eBOX-3350MX. For more troubleshooting guidelines, please contact your nearest dealer for technical support. TROUBLESHOOTING YOUR VESA PC A. VESA PC does not start Make sure the eBOX-3350MX is properly secured and plugged into a power source before it is turned on. Make sure the power indicator shows the power is on. See section 2 for more information about “eBOX-3350MX Overview”.
“Load Optimal Defaults (Y/N)? Y” (BIOS Setup menu “Exit”) C. “Operating System Not Found” – A message indicating that “Operating system not found” appear when my VESA PC starts (Windows won’t start) Enter your BIOS setup main menu by pressing key, be sure that the C: drive is enable. If Windows still does not start, follow these steps to initialize the BIOS: 1. Turn off the eBOX-3350MX. 2. Remove any peripheral devices connected to the eBOX-3350MX. 3. Restart the eBOX-3350MX. 4.
APPENDIX ONBOARD CONNECTORS SUMMARY SUMMARY TABLE FOR CPU BOARD Nbr Description Type of Connections Pin nbrs. J5 USB (Front) USB Connector 8-pin J6 USB (Front) USB Connector 8-pin J7 USB (Back) USB Connector 8-pin J9 Ethernet LAN RJ-45 8-pin J10 VGA D-Sub Connector 15-pin J11 Line-Out Audio Jack 2-pin J13 Microphone Audio Jack 2-pin J16 DC 5V Input Mini USB JACK 1-pin ` FRONT CONNECTORS OUTLINE FOR eBOX-3350MX SD Slot USB 2.
` REAR CONNECTORS OUTLINE FOR eBOX-3350MX Power Jack RJ-45 LAN VGA USB 2.
PIN ASSIGNMENTS J16: Mini USB DC Power Input Pin # Signal Name 1 5V Input 2 USB IN - 3 USB IN + 4 NONE 5 GND J7: USB (90o)– 4-pin USB Type 1 Connector (Vertical Type) Pin # Signal Name 1 VCC 2 USB0- 3 USB0+ 4 GND 5 GGND 6 GGND J5,J6:USB : For connection to external USB device –4-pin USB Type 1 Connector (H) Pin # Signal Name 1 VCC 2 USB2- 3 USB2+ 4 GND 5 NC 6 NC LED Color State Green Power On LED: POWER ON/OFF eBOX-3350MX 15
` PIN ASSIGNMENTS J15: VGA – 15-pin D-Sub Connector Pin # Signal Name 1 MR 2 MG 3 MB 4 NC 5 GND Pin # 6 7 8 9 10 Signal Name GND GND GND NC GND Pin # 11 12 13 14 15 Signal Name NC VCC HYSYNC VSYNC VCC J9: LAN RJ-45 Connector Pin # Signal Name Pin # Signal Name 1 FTXD+ 2 FTXD- 3 FRXIN+ 4 NC 5 NC 6 FRXIN- 7 NC 8 NC eBOX-3350MX 16
How to use 75 x 75mm to 100 x 100 mm VESA Mount Rack (Optional item) 1. Check the spare pars above. 2. Retaining screw on the VESA holes of the eBOX-3350MX unit. 4. Front View 3. Rear View 5. Retaining screw to the LCD Monitor. 6.
WARRANTY TERMS AND CONDITIONS 1. Warranty The warranty terms for eBOX-3350MX series are twelve (12) months from the beginning on the date of invoice. During the warranty period, DMP Electronics Will repair replace the product covered under this limited warranty. 2. Service and Support DMP Electronics Inc. provides the technical support for hardware problems with your system throughout the warranty period.
MEMO eBOX-3350MX 19
