User`s manual

_______________________________eBox-2300SX-LS User’s Manual
52
caused by improper using “Regedit”.
The way of editing system register information, please open “Changing Keys a
nd Values” in the Regedt32.exe of “Discription” or open “Add and Delete Infor
mation in the Registry” and “Edit Registry Data” in the Regedt32.exe of “Discri
ption”. Please be notice, doing backup before editing registry. If you use Windo
ws NT or Windows 2000, you have to upgrade ERD (Emergent Revise Disk).
Select particular License server and find the register route as below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\TermService\Para
meters, and plus:
Name: DefaultLicenseServer
Data type: REG_SZ
Data value: ServerName
Below information is how to change the proper License server for ServerName:
http://support.microsoft.com/support/kb/articles/Q239/1/07.ASP
Second section The using of eBox-2300SX-LS
 Q：Why the eBox-2300SX-LS has no connection?
A：Plwase be sure that the LAN Card, IP and DHCP Server if can be work.
Use the PING to test whether the LAN was broken or not.
Please be test whether the firewall was opened.
 Q：What kind of port on Internet for Server use?
A： 1604 port Citrix ICA, MS Terminal。
3389 port RDP Protocol (Terminal Server)。
1494 port Citrix ICA Protocol。
 Q：What kind of situation is proper for 2300SX-LS?
A：For central control in order to reduce the burden of workers.
The equipment is not enough for demand but it needs the new OS.
 Q：I can not enter the Setup mode, why?
A：Please check:
1. whether the Caps Lock and Number Lock were turned off.
2. whether the Driver CD was put in the CD-ROM.
3. whether the VGA Driver was in right setting. In general, the situation occurr
ed because the VGA Driver is not matching with the VGA which you are using.
4. If all the method as above were not work, please be select “force turn-off s
etupmode” in “online upgrade”.
 Q: I always feel my screen is flashing, why?
A: The 2300SX-LS supports VGA clock only to 60MHz because the default isV
ESA. You can adjust the VGA Driver in Control Panel/ Screen.
 Q: How to change the mode from usermode to setupmode without re
booting?
A: Please be press Ctrl+Alt+Backspace, and then press Caps Lock and Numb
er Lock.
 Q：Why the Flash part of webset always flashes when I browse it by
IE in the RDP?
A：You could upgrade the IE to IE6.x and the problem would be solved.