User`s manual

_______________________________eBox-2300SX-LS User’s Manual
44
click “Next”. After pressing “Finish”, you will get a mail of PIN. (Personal ID Number).
Then, go back to “Terminal Service License”, click right mouse key on Computer
Name, and select “Start Server.” Select first item on “License Wizard” then press
“Next”. Input the PIN and compelte the step.
Step 2:
”License Wizard” select present install lisence and press “Next” (or click “Start”/
“Programe”/ “System Management”, select “Terminal Service License”, click right
mouse key the “Install License” on Computer Name.) If you were “Select” customer,
you could input Enrollment Agreement number and choose License Type. “Open
License” customer input Authorization Number and License Number 。 Other
customers input the PIN which you purchased (25 characters), press “Add” and
“Next”.
 Q：How to calculate the License Number which Terminal Service Client
access demands?
A：If you bought 10 merchadises and all of them may connect to Win2000 Terminal
Server, you would need to buy 10 Terminal Client License. However, if your client
access is Win2000 Professional or Win2000 Server OS，it was not necessary to buy
License because there is internal Win2000 Terminal Server License.
 Q：What kind of OS (Operation Software) can support Terminal Client?
A：Windows 2000 only support 32 bit x86 Windows OS (Win9x、NT、Windows2000)。
Other devices (Macintosh Computer or UNIX) can connect to Server by using joint
vendor’s software.
 Q：How to set auto-login Terminal server ?
A: Click”Start”/ “Programe”/ “System Management”, then press “Terminal Server
Service Setting”. Click “Connect” data folder, click RDP-Tcp Connect，click right
mouse key, click “Content” and “Login Default”, and click ● auto-run login information
as below, fill in “Name” and “PIN”,. Finally, click “OK” to complete the step.
 Q：How to install and exchange the “Remote Manage” and “Applied
Programe Mode” in Terminal server?
A：1. Start “Terminal Service” by “Remote Manage Mode”
Start “Add/ Remove Programe” in “Contrl Panel”.
Press “Add/ Remove Windows Component” in order to start “Windows Component
Wizard”.
In “Windows Componet”, select “Terminal Service”, and click “Next”.
In “Terminal Service Install Program”, click “Remote Manage Mode”.
The system will duplicate essential file to your hard disk, and it will use the Software
in Server after rebooting.
2. Start “Terminal Service” by “Applied Service Mode”
Start “Add/ Remove Programe” in “Contrl Panel”.
Press “Add/ Remove Windows Component” in order to start “Windows Component
Wizard”.
In “Windows Componet”, select “Terminal Service”, and click “Next”.
”Terminal Service License” is an essential component. It is in charge in licensing to
client on “Terminal” Server. Suggest that you do not start “Terminal Service License”
on the computer which with “Terminal Service” at the same time.
Press “Applied Program Server Mode” in the “Terminal Service Install Program”. After