User`s manual

_______________________________eBox-2300SX-LS User’s Manual

Edit： Delet/ Modify Conncetion

Delete： Delete Connection Definition

Desktop： Select ICA and RDP which be set, then press ”Desktop”, and the

connection will showed as ICON and be put on desktop in the User

Mode.

Autorun： Press “Autorun” and the connection as ICA or RDP which be set will in

auto- run and in connection when user enter User Mode.

PRINT： Press “PRINT” will start Printer Setting screen which can set sharing

local access printer.

（7-3）

About： Show the current version of connection manager.

7.1 Set ICA Connection：

This section illustrates how to connect to Citrix Family: The MetaFrame 1.8, Meta

Frame XP and CDS (Citrix Device Service).

You can set up two connection type in Citrix Server: connect to Citrix Server or

applied programe which is released. You can pre-set in Server that user can execute

applied programes on the desktop after connecting to Server. If user have connected

to system desktop and could use any applied programes which be set in ICA Client

access to relate to applied programe from ICA Server on the desktop, these applied

programes could be put in different Servers. (Load Balance).

When you connect to ICA Server, you have to select ICA Connection and

press ”New” in the Connetcion Manager, and you enable to start ICA setting list.

Belows are illustrations of setting:

7.1.1 ICA-Connection Setting

This Part illustrates when user set up an ICA related connection setting for the

first time, it will open ICA Server connection setting list viwer as (7-4). Below is

showing how to set each field.