User`s manual

_______________________________eBox-2300SX-LS User’s Manual
14
Fifth Section: Network Setting
1 Click “My Computer”/ “Control Panel”/ “Network” and it will show Network
Configuration as （5-1）. User can press Edit to proceed to network setting, and then
click Enable DHCP to start DHCP and press OK. The system will catch DHCP
setting in normal situation. If not, you can catch IP by manual work.（ means
Enable， means Disable）。
（5-1）
2 Press Enable DHCP will show as （5-1） and the DHCP will be started. Then press OK
and eBox will auto- catch DHCP Network Address; or manual- input configuration of
IP、Submask、Brocast IP、Gateway、Dns.