User`s guide

34
Using Cables for Connection
To avoid the problem, use only the specified interface cables in your accessory bag. The supplier
will not be responsible for the connection arising from the other unspecified peripheral equipment.
Do not use cut or damaged cables for connection.
Cleaning Your DIN PC
Clean DIN PC with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzene, as
these may damage the finish of DIN PC.
When a solid object falls or a liquid spills onto the DIN PC, turn off the DIN PC immediately and
unplug the LAN and power cables. Contact a qualified person or your dealer to check the DIN PC
before you use it again.
Always disconnect the power cord from the power source before cleaning the DIN PC.