User`s guide

33
Taking Care of your DIN PC
This section gives you some guidelines on using DIN PC: Safe using, Storing and Handling.
Storing
Do not place DIN PC-333x Series in a location that is subject to:
 Heating sources, such as stove, oven, heater, radiator or air duct
 Direct contact from sunlight
 Rain or moisture area
 Excessive dust accumulation area
 High humidity place
 Constant or occasional mechanical movement, vibration or shock
 Strong magnets or magnetic fields or magnetically unshielded speakers
 Ambient temperature of more than 95
o
F (35
o
C) or less than 32
o
F (0
o
C)
Do not place other electronic/ electrical equipments near DIN PC-333x Series. The
electromagnetic field of DIN PC-333x Series may cause interference subjecting to malfunction.
Provide adequate air ventilation (circulation) to prevent internal buildup of heat. Leave a space of
at least 8 inches (20cm) behind the sides and back panel of the DIN PC-333x Series.
Change of environmental temperature: Problems may occur when there is a sudden change of
environmental temperature, or if the DIN PC-333x Series is brought directly from a cold location to
a warm one, moisture may condense inside DIN PC-333x Series. Turn off the device, and
contact your nearest dealer.
Check the surrounding appliance(s) before using DIN PC-333x Series. Since the DIN PC-333x
Series uses high-frequency radio signal and may interface with radio or TV reception causing
interference or poor signal display. When this happens, relocate the DIN PC-333x Series by a
suitable distance away from the set.
Do not drop the DIN PC-333x Series from the working table nor place heavy objects on top of it.