User`s guide

12
ETHERNET DRIVER:
1. Find the yellow question mark of Ethernet in the Device Manager under the control panel/ system.
2. On 1
st
question mark, select “Update Driver Software” and choose the right path, then click “Install
this driver software anyway” when Windows Security pops out. Select 1
st
question mark as 10/
100M LAN driver.
3. After installation completed, the Device Manager will update and show the correct device.
4. Following the procedure above, set 2
nd
question mark as 1G LAN driver.
5. Following the procedure above, set 3
rd
question mark as WiFi dongle (optional).