Specifications

® 2011 - 3 - User manual 0025
 Never break the seals to open the front cover as this might influence the
functionality or accuracy of the meter, and will void all warranty.
 Do not drop, or allow physical impact to the meter as there are high precision
components inside that may break and render the meter measurement
inaccurate.
Exclusion of liability
We have checked the contents of this publication and every effort has been
made to ensure that the descriptions are as accurate as possible.
However, deviations from the description cannot be completely ruled out, so
that no liability can be accepted for any errors or omissions in the information
given. The data in this manual is checked regularly and the necessary
corrections will be included in subsequent editions. If you have any suggestions,
please let us know.
Subject to technical modifications without notice.
Copyright
Copyright Inepro Metering March 2011 All rights Reserved.
It is prohibited to pass on or copy this document or to use or disclose its contents
without our express permission. Any duplication is a violation of the law and
subject to criminal and civil penalties. All rights reserved, particularly for
pending or approved patent awards or registered trademarks.
Registered trademarks
DMMetering
®
is a registered trademark of Inepro Metering – member of the
Inepro Group. Other names appearing in this manual may be trademarks of
third parties and are property of their respectful owners.
1.2 Foreword
Thank you for purchasing the DMMetering PRO-1250D 100A MID approved DIN
rail three phase energy meter. The DMMetering PRO-1250D 100A MID approved
energy meter is the most advanced type electronic kWh meter available at the
market. With the DMMetering product range we have introduced a large scale of
energy meters on the market suitable for 110V AC to 400V AC (50 or 60Hz).
Besides the normal energy meters we also developed our own pre-paid meters
with chip card, chip card re-loaders and a complete PC management control
system. For more information on other products please contact our sales
department at [e-mail] or [e-mail].
Although we produce the DMMetering PRO-1250D 100A MID approved meter
according to the requirements of EN 50470-3 and our quality inspection is very
accurate there might always be a possibility that your product shows a defect or
failure for which we do apologize. Under normal conditions your product should
give you years of trouble free operation. In case there is a problem with the
energy meter you should contact your dealer immediately. All energy meters are
sealed with a special seal. Once this seal is broken there is no possibility to claim
any warranty. Therefore NEVER open an energy meter or break the seal of the
energy meter. The warranty time is 3 years, after production, and only valid for
construction faults.