User Manual

DMG | User Manual - MAXI Switch

Displays the rmware version, the Network name and password for the Wi-Fi

mode.

These informations can be nd in the “info” section of the MAXI Switch Controls

menu.

Wireless DMX dot is red when no signal is received, green when the MAXI Switch is

connected to a Wireless DMX emitter.

• To synchronize with a new emitter, go back to general menu and enter

Wireless DMX mode again

Wi-Fi dot is red when no signal is received, green when the MAXI Switch is

connected to a Wi-Fi device with an Art-Net app enabled.

CUSTOM MODE

(Continued)

UPGRADING THE MAXI SWITCH :

PRESET MENU :

SPLIT MODE :

INFO

• Download the rmware from DMG Lumière website :

dmglumiere.com/upgrade

• Copy the le to a USB stick

• Insert the USB key in the MAXI Switch

If a correct le is found on the USB stick, the MAXI Switch will prompt an

upgrade menu

• Select YES to upgrade

• Wait for the upgrade process to nish, the MAXI Switch will turn off and on

by itself to make the upgrade active

• By holding the “CCT” button for 2 seconds in LOCAL MODE, you enter the

preset menu. Here you can store presets or recall strored presets.

• If you turned the MAXI Switch on SPLIT MODE, By holding the “SWITCH”

button for 2 seconds you enter the SPLIT MODE where you control each

panel independantly

• Two successive screens will appear when selecting DMX/Wireless DMX

address, corresponding two each panel

• By selecting «Panel 1+2», you can control the panels’ brightness together,

without modifying their initial color temperature nor brightness difference