Specifications

System Software Diagnostics Guide — September 2006 87
DM3post Reference
Example 2: Dm3 post run with the reset option on a board in slot 17,
bus 0
The following example runs DM3post with the reset option on a board in slot 17, bus 0:
dm3post -s17 -b0 -r
You will get the following response:
You have chosen to run diagnostics on the board in slot 17, bus 0.
Do you wish to continue (y/n)?
If you answer Y, the following will be printed to the screen:
dm3post processing...
The success/failure message will be printed to the screen when POST is complete. Here is an
example:
SUCCESS: POST passed for board in slot 17, bus 0. Diagnostic Codes: 0x03 0xfc