Specifications

System Software Diagnostics Guide — September 2006 73
Diagnostics Management Console (DMC) Reference
13.3.1 Menu Bar
The main window of the DMC has a menu bar along the top part of the window. This menu bar
allows you to access several drop-down menus. Most actions on these menus can also be performed
using shortcut keys. The menus, menu items, and shortcut keys are as follows:
File
• Open log file (CTRL+O) - Opens the log file that is selected (highlighted) in the log file
panel.
• Execute application (F5) - Launches the diagnostic tool that is selected (highlighted) in the
application panel. For more information about each tool, refer to the tool reference chapters in
this Diagnostics Guide.
• Exit (CTRL+X) - Closes the DMC.
Tools
• Configuration (F4) - Allows you to modify settings for the DMC. For more information, refer
to Section 13.4, “DMC Configuration Dialog”, on page 74.
Help
• Contents (F1) - Displays online help that describes the DMC and explains how to use the
DMC.
13.3.2 Diagnostic Application Panels
On the left side of the Diagnostics Management Console (DMC) main window are two panels: the
top panel lists local diagnostic applications and the bottom panel lists remote diagnostic
applications. Remote diagnostic applications will be listed only if the DMC has been configured to
launch diagnostic applications remotely (see Section 13.4, “DMC Configuration Dialog”, on page
74).
For instructions on launching diagnostic applications, refer to one of the following:
• Section 3.2, “Launching a Diagnostic Tool”, on page 23 (for local machine)
• Section 3.3, “Launching a Diagnostic Tool on a Remote Machine”, on page 24
Note: The terms “diagnostic application” and “diagnostic tool” both refer to the diagnostic tools provided
with the Intel telecom software.
13.3.3 Log File Panel
The log file panel is on the right side of the Diagnostics Management Console (DMC) main
window. This panel allows you to select a log file to view.