Specifications

System Software Diagnostics Guide — September 2006 169
RTFManager Reference
Figure 22. RTFManager Filtering Tab
The following procedure describes how to use the Runtime Trace Facility Manager Configuration
window’s Filtering tab:
1. The top row of check boxes represents several Intel® telecom product families (DM3,
Springware, Host Media Processing). To trace a library that runs on a given product family,
you must populate the check box for the product family. For example, if the application you’d
like to trace uses the voice library on Springware hardware, you must check the SPWR box.
Each technology has a slider that allows you to set the RTF’s trace level. This is the Intel
telecom product technology level. The technology sliders are defined as follows:
• OAM - traces the DM3 transport layer, and also includes such things as timeslot
configuration, CT Bus clocking agent, event services (fault detectors), and OAM IPC
• PSTN - traces call control libraries (Global Call, DTI, Standard Runtime)
• FAX - traces Fax libraries
• IPT - traces Internet Protocol libraries (IPML, DM3 transport layer, IP call control)
• Media - traces media libraries (Voice, CSP)
• Conf - traces conferencing libraries (CNF, DM3 transport layer, DCB, MSI, HDSI)
2. Trace levels appear on the left side of the window. Each trace level corresponds to turning on
certain labels according to the following: