Specifications

132 System Software Diagnostics Guide — September 2006
PSTN Diagnostics Tool Reference
Drop
Delete a call
DialDigits
Generate signals for selecting and establishing a connection
Release
Release the active call on the channel.
Figure 12. Outbound Call Control Command Buttons
Inbound Call Control Commands
The commands under this button are as follows:
AnswerCall
Answer the call
AcceptCall
Accept the call (this precedes the option of handing off the call to another client or party)
ProceedCall
Proceed the call (this sends the call proceeding message to the originating side, and waits for
Accept (to accept call) or Answer (to answer call) as a subsequent command from the host for
further progress of the call). This is available only for ISDN.
RejectCall
Reject the call
RedirectCall
Redirect the call elsewhere.
Figure 13. Inbound Call Command Buttons
Call Hold Commands
Note: The following commands are advanced functions for technical support use only.