Specifications

System Software Diagnostics Guide — September 2006 131
PSTN Diagnostics Tool Reference
ResetLineDevice.. button in Figure 9 toggles between setting a channel in service and out of
service.
Figure 9. Toggle Command Buttons
Examples of command buttons that issue a command directly are the MakeCall, DialDigits, Drop,
and Release buttons in a channel level view shown in Figure 10. Click on a button to issue a
command.
Figure 10. Direct Command Buttons
Following is a list of the option buttons. There is a submenu of command buttons under each of the
option buttons.
Channel State Commands
The commands under this button are as follows:
SetChanState
Set a channel in service or out of service
ResetLineDevice
Drop all calls on the channel and return the call state to Idle
Figure 11. Channel State Command Buttons
Outbound Call Control Commands
The commands under this button are as follows:
MakeCall
Place an outgoing call