Datasheet

4 Rev. 9 ©1999 - 2005 DMC Co., Ltd.
A
TP/AST Series Product Specifications
1-6. Appearance
§ Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2)
Item Size (mm) Length (mm) Acceptable Numbers
0.1≥W>0.08 4≥L 1pcs in φ30mm
0.08≥W>0.05 6≥L 2pcs in φ20mm
0.05≥W>0.03 10≥L 2pcs in φ20mm
Scratch
0.03≥W 20≥L
Acceptable
0.1≥W>0.05 5≥L 2pcs in φ30mm
Dust
(Linear)
0.05≥W
Acceptable Acceptable
0.3≥D>0.2 2pcs in φ30mm
Dust
(Circular)
0.2≥D
Acceptable
Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the
electrical characteristics are affected.
§ Dirt
Acceptable if not noticeable on a black mat.
§ Tip, crack (t = glass thickness) (applicable only for the glass)
Item Size (mm) Acceptable Numbers
X
≤3
Y
≤3
Corner
Z
≤t
2pcs
/panel
X
≤5
Y
≤3
Side
Z
≤t
2pcs
/side
Crack 0pcs (acceptable)
Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the
electrical characteristics are affected.
X
Y
Z
Z
X
Y