Specification G121SN01 V4 incl. Touch - 4W Content: Mechanical Drawing Appendix A: Specification of TFT G121SN01 V4 Appendix B: Specification of Touch AST-121A080A ( Please be aware that some of the values e.g. optical, mechanical etc. of the complete unit (assembled display plus touch panel) might differ from the original values of the individual components.
1 2 4 3 6 5 7 279 ±0,5 ODD 262 ±0,3 ODT 251 VAT 247 AAT 246 AAD 8,75 ±0,5 A 8 A 10,41 (max. 11,43) B B D E 184,50 AAD 185,50 AAT 189 VAT 199 ±0,3 ODT 209 ±0,5 ODD 80 ±1 C 1 NOT TO BE DISCLOSED TO THIRD PARTY WITHOUT PERMISSION FROM C CONRAC GMBH / Data Modul AG Contact 10 ±0,5 ODD ODT VAT AAT AAD 3 D Outline Dimension Display Outline Dimension Touch Viewing Area Touch Active Area Touch Active Area Display This drawing is only schematic representation of the structure.
G121SN01 V4 ( ) Preliminary Specifications ( V ) Final Specifications Module 12.1 Inch Color TFT-LCD Model Name G121SN01 V4 Customer Date Approved by Date 2012/10/15 2/ 10 /2 4 Leader Feng 01 Checked & Approved by se O nl y /2 Prepared by 2012/10/15 In te rn a lU Yichih Chen General Display Business Division / AU Optronics corporation AU O C on fid en tia lF or D AT AM O D U L Note: This Specification is subject to change without notice. G121SN01 V4 rev. 1.
G121SN01 V4 Contents 1. Operating Precautions.....................................................................................4 2. General Description .........................................................................................5 2.1 Display Characteristics...........................................................................................................5 2.2 Optical Characteristics ..................................................................................................
G121SN01 V4 Record of Revision Version and Date 0.0 2009/02/03 1.0 2009/05/14 Page All 13 19 1.1 2010/10/15 1.2 1.3 2011/03/23 2011/08/30 1.4 2012/10/15 13 New Description First Edition Color / Chromaticity Coordinates(Red x y, Green x y, Blue x y): TBD Parameter guideline for LED backlight Dimming Duty cycle Min: TBD 6 22 23 10 13 18 16 21 Old description Add Min., Typ., Max.
G121SN01 V4 1. Operating Precautions AU O C on fid en tia lF or D AT AM O D U L In te rn a lU se O nl y /2 01 2/ 10 /2 4 1) Since front polarizer is easily damaged, please be cautious and not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
G121SN01 V4 2. General Description This specification applies to the Color Active Matrix Liquid Crystal Display G121SN01 V4 composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). LED driving board for backlight unit is included in G121SN01 V4 and the LED unit is replaceable. All input signals are LVDS interface and compatible with G121SN01 V3.
Tepratu): itonsa25(Rm vengdistac 1with50cm G121SN01 V4 2.2 Optical Characteristics The optical characteristics are measured under stable cond Unit White Luminance [cd/m2] Uniformity % Rising [msec] - - Note 2, 3 500 700 25 - 35 Note 4 - 10 20 Note 5 Raising + Falling - - 35 55 70 80 - [degree] [degree] Horizontal CR = 10 (Right) (Left) 70 [degree] [degree] Vertical CR = 10 (Upper) (Lower) 55 65 - 0.556 0.606 0.656 0.254 0.304 0.300 Green y /2 0.
Viewngalsthem urntofcasri-10,thescrnt,overa180°hizont G121SN01 V4 Note 2: Definition of 5 points position (Display active area: 246mm (H) x 184.
G121SN01 V4 AU O C on fid en tia lF or D AT AM O D U L In te rn a lU se O nl y /2 01 2/ 10 /2 4 measurement viewing angle. G121SN01 V4 rev. 1.4 Page 8/24 Data Modul AG - www.data-modul.
G121SN01 V4 3. Functional Block Diagram AU O C on fid en tia lF or D AT AM O D U L In te rn a lU se O nl y /2 01 2/ 10 /2 4 The following diagram shows the functional block of the 12.1 inch color TFT/LCD module: G121SN01 V4 rev. 1.4 Page 9/24 Data Modul AG - www.data-modul.
Bulbshode39@ G121SN01 V4 4. Absolute Maximum Ratings 4.1 Absolute Ratings of TFT LCD Module Item Symbol Logic/LCD Drive Voltage Min Vin Max -0.3 Unit +3.6 [Volt] 4.2 Absolute Ratings of Environment Item Symbol Min Max Unit Operation Humidity HOP 5 95 [%RH] Storage Humidity HST 95 [%RH] Operating Temperature TOP Storage Temperature TST +85 -30 [ C] o +85 5 and no condensation.
G121SN01 V4 5. Electrical Characteristics 5.1 TFT LCD Module 5.1.1 Power Specification Symbol Parameter Logic/LCD Input Voltage VDD IVDD Min Typ Max Units 3.0 3.3 3.6 [Volt] - 280 - [mA] - 0.924 - [Watt] LCD Input Current PVDD LCD Power comsumption Irush LCD LCD Inrush Current - - 1.5 [A] VDDrp Allowable Logic/LCD Drive Ripple Voltage - - 100 [mV] p-p Remark VDD=3.3V at 60 HZ, all Black Pattern VDD=3.3V at 60 HZ, all Black Pattern Note 1; VDD=3.
G121SN01 V4 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Symbol Item Min. Typ. Max. Unit Remark VTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold 100 - - [mV] VCM=1.2V Input Differential Voltage 100 400 600 [mV] Differential Input Common Mode Voltage 1.1 - 1.
at25E G121SN01 V4 5.2 Backlight Unit 5.2.1 Parameter guideline for LCD Following characteristics are measured under stable condition . (Room Temperature): Symbol Parameter Min. Typ. Max. VCC Input Voltage 10.8 12 12.6 IVCC Input Current - 0.48 - PVCC Power Consumption - 5.76 On Control Voltage 3.0 - Off Control Voltage - 0 Dimming Frequency 200 - Swing Voltage 3 3.3 5.5 Dimming duty cycle 5 - 100 % LED Forward Current - 80 - [mA] Ta = 25oC - 27.9 31.
G121SN01 V4 6. Signal Characteristics 6.1 Pixel Format Image Following figure shows the relationship between input signal and LCD pixel format. 1 2 st Pixel 1st 800 th Pixel th Pixel R G B R G B R G B R G B R Pixel G B R G B B R G B 2/ 01 R G rn a lU se O nl y Lin /2 600th 10 /2 4 Line 799 nd In te 6.2 Scanning Direction en tia lF or D AT AM O D U L The following figures show the image seen from the front view.
G121SN01 V4 6.3 TFT-LCD Interface Signal Description The module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device.
G121SN01 V4 6.4 The Input Data Format 6.4.1 SEL68 SEL68 =“Low” or “NC” for 6 bits LVDS Input SEL68 = “High” for 8 bits LVDS Input NS-like format en fid /2 10 2/ 01 /2 y nl O se te rn a lU Green-pixel Data Each green pixel’s brightness data consists of these 6/8 bits pixel data. L U O D AT AM D Blue-pixel Data Each blue pixel’s brightness data consists of these 6/8 bits pixel data.
G121SN01 V4 6.5 TFT-LCD Interface Timing 6.5.1 Timing Characteristics Signal Symbol Clock Frequency 1/ TClock Vertical Section Horizontal Section Period TV Active TVD Blanking TVB Period TH Active THD Blanking Note 1: Frame rate is 60 Hz. Note 2: DE mode. THB Min. Typ. 34 Max. 40 Unit 48.
G121SN01 V4 6.6 Power ON/OFF Sequence VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. 30 40 O 10 - 10 0 U T6 lF or T10 AT AM T9 100 D T8 10 O D T7 nl [ms] [ms] - [ms] - [ms] - [ms] - - [ms] - - [ms] - 0 16 1000 - - Units - - 50 10 - [ms] [ms] [ms] [ms] tia T11 - 10 50 rn a T5 T4 - te 175 In T3 - se 0.5 T2 01 Max. /2 Typ.
G121SN01 V4 7. Connector & Pin Assignment Physical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components. 7.1 TFT-LCD Signal (CN1): LCD Connector Connector Name / Designation Manufacturer Signal Connector STM or compatible Adaptable Plug P240420 or compatible MSB240420-E or compatible Connector Model Number Symbol VDD GND RIN0GND RIN1+ RIN2GND CLKIN+ RIN3RSV Pin No.
G121SN01 V4 8. Reliability Test Criteria Items Required Condition Temperature Humidity Bias Note 40 C, 90%RH, 300 hours o High Temperature Operation Low Temperature Operation Hot Storage 85 C, 300 hours o -30 C, 300 hours o 85 C, 300 hours o Cold Storage -30 C, 300 hours o Thermal Shock Test -20 C / 30 min, 60 C / 30 min, 100cycles, o Hot Start Test 40 C minimun ramp rate o o 85 C / 1Hr min. power on/off per 5 minutes, 5 times o Cold Start Test -30 C / 1Hr min.
Data Modul AG - www.data-modul.com fid C on en or lF tia L U D O AM AT D te In O Dimension (Front View) 9.1 LCM Outline U 9. Mechanical Characteristics A rn al U se nl y O 4 0/ 2 /1 01 2 /2 G121SN01 V4 Page 21/24 G121SN01 V4 rev. 1.
Data Modul AG - www.data-modul.com AU O Dimension (Rear View) 9.2 LCM Outline C on fid en tia lF or D AT AM O D U L te In rn al U se nl y O 4 0/ 2 /1 01 2 /2 G121SN01 V4 Page 22/24 G121SN01 V4 rev. 1.
G121SN01 V4 10. Label and Packaging 10.1 Shipping Label (on the rear side of TFT-LCD display) 4 G121SN01 D AT AM O D U L In te rn al U se O nl y /2 01 2/ 10 /2 4 10.2 Carton Package AU O C on fid en tia lF or Note: 1. Max. Capacity: 20pcs LCD Modules / per carton 2. Max. Weight: 14.8 kg / per carton 3. The outside dimension of carton is 570(L) mm x 320(W) mm x 420(H) mm G121SN01 V4 rev. 1.4 Page 23/24 Data Modul AG - www.data-modul.
G121SN01 V4 11 Safety 11.1 Sharp Edge Requirements There will be no sharp edges or comers on the display assembly that could cause injury. 11.2 Materials 11.2.1 Toxicity There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist. 11.2.
Specification AST/ATP Series Revision 11 Version March 23, 2010 Data Modul AG - www.data-modul.
Table of Contents 1. Product Specifications ...........................................................................................................................3 1-1. Product Applicable .............................................................................................................................3 1-2. Structure.............................................................................................................................................3 1-3. Environmental Specifications .
1. Product Specifications 1-1. Product Applicable § This specification is applied to the analog resistive touchscreen: ATP/AST Series. 1-2. Structure § Dimensions, structure, and shape are referred on the drawing attached. 1-3. Environmental Specifications Specification Value Operating Temperature -20°C to 70°C (no condensation) Operating Humidity -20°C to 60°C Less than 90%RH (no condensation) 3 Exceeding 60°C 133.
1-6. Appearance § Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2) Item Width (mm) Length (mm) Acceptable Numbers Linear(Scratch/Dust) Over 0.1mm in diameter refer to the Circular. 0.1≥W>0.05 4≥L 1pcs in φ30mm 0.05≥W>0.03 10≥L 2pcs in φ20mm 0.03≥W 20≥L Acceptable Circular (Scratch/Dust) 0.4≥D>0.3 *1 1pcs in viewing area *1 0.3≥D>0.2 2pcs in φ30mm 0.2≥D Acceptable Total Within 5pcs /panel Applied only in the Active Area.
2. Testing Regulation 2-1. Testing Regulation § If the regulation is not specified, the test is performed under the supplier’s regulation. § Tests are performed under the room temperature unless specified. The room temperature is referred as follows: Temperature: 20°C±5°C Humidity: 65%±10%RH 2-2. Environmental Specifications § Chemical Resistance Test Condition: Tested after leaving the chemical on the surface for 12 hours being wiped off by cloth. Judgement: Must be no effect in appearance. 2-3.
2-4. Electrical Characteristics § Terminal Resistance Test Condition: Top and bottom electrodes are measured at the terminal. Judgement: Must satisfy the specification. § Insulation Resistance Test Neighboring Terminals: Measured by applying the reference voltage to the terminals Active Area Electrodes: Measured by applying the reference voltage to the top and bottom electrodes. Judgement: Must satisfy the specification. 2-5. Appearance § Appearance Test Condition: Tested by an examiner with over 1.
3. Reliability Condition 3-1. Temperature Condition § Temperature Condition Test Following test are performed in the condition with no dew condensation: Cold Test: Tested after leaving the parts in -40°C±3°C for 240 hours and in the room temperature for 2 hours. Heat Test: Tested after leaving the parts in 80°C±3°C for 240 hours and in the room temperature for 2 hours.
5. Handling Notes 5-1. Precautions § This product is intended for use in standard applications (computers, office automation, and other office equipment, industrial, communications, and measurement equipment, personal and household devices, etc.
5-5. Mounting Notes Bezel Bezel edge must be positioned in the area between the Active Area and the Viewing Area. The bezel may press the touchscreen and cause input if the edge enters the Active Area. § Gap between the Bezel and Touchscreen Active Area Viewing Area Bezel Top Electrode A gap of approximately 0.5mm is needed between the bezel and the top electrode. It may cause unexpected input if the gap is too narrow. 0.
6. Warranty 6-1. Warranty Period § The warranty period is limited to 1 year from the date of shipping. The warranty for the initial defection such as appearance defection is limited to 1 month. § Any defected parts under proper use will be examined by the supplier and replaced by the new parts if the defection is considered to be caused by the supplier. § The replacement is subject to be included in the next lot. 6-2.
7. Revision history Rev1 (April 15, 1998) Initial release Rev2 (June 1, 1999) The overall revision by specification review. Rev3 (April 1, 2002) The address in the office was changed by the move. Rev4 (August 16, 2002) 1-4.Activation Force is changed “50g± 30g” to “0.5N±0.3”. 1-4.Light Transmission is changed 76% to 80%(TYP). Rev5 (September 3, 2002) 1-3.Operating Temperature is changed “0°C to 60°C” to “-20°C to 70°C”. 1-3.Storing Temperature is changed “-20°C to 70°C” to “-40°C to 80°C” 1-4.
Rev10 (November 10, 2006) The specification item name was changed. 1-3.”Storing Temperature” to “Storage Temperature” 1-3.”Storing Humidity” to “Storage Humidity” 1-4.”Operating Load” to “Activation Force” 1-4.”Light Transmissivity” to “Light Transmittance” 1-4.”Top Surface Hardness” to “Surface Hardness” 2-3.”Operating Load Test” to “Activation Force Test” 2-3.”Operating Load” to “Activation Force” 3-1.”Operationg Load” to “Activation Force” 1-4.Operating Force is changed “0.5N±0.3N” to “0.05N to 0.8N”.
1 2 4 3 6 5 7 279 ±0,5 ODD 262 ±0,3 ODT 251 VAT 247 AAT 246 AAD 8,75 ±0,5 A 8 A 10,41 (max. 11,43) B B D E 184,50 AAD 185,50 AAT 189 VAT 199 ±0,3 ODT 209 ±0,5 ODD 80 ±1 C 1 NOT TO BE DISCLOSED TO THIRD PARTY WITHOUT PERMISSION FROM C CONRAC GMBH / Data Modul AG Contact 10 ±0,5 ODD ODT VAT AAT AAD 3 D Outline Dimension Display Outline Dimension Touch Viewing Area Touch Active Area Touch Active Area Display This drawing is only schematic representation of the structure.
DI SPLAYS AND EMBEDDED SOLUTIONS DI SPLAYS AND EMBEDDED SOLUTIONS DATA MODUL Headquarters Munich Landsberger Str. 322 D-80687 Munich - Germany Phone: +49-89-56017-0 Fax: +49-89-56017-119 www.data-modul.com Sales Office Hamburg Borsteler Chaussee 51 D-22453 Hamburg - Germany Phone: +49-40-42947377-0 Sales Office Duesseldorf Fritz-Vomfelde-Str. 8 D-40547 Duesseldorf - Germany Phone: +49-211-52709-0 Sales Office Scandinavia Lundsmindevej 5 DK-6000 Kolding - Denmark Phone: +45-75-224477 DATA MODUL France, S.
