User manual

IPPC-6152A Series User Manual 46
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive
supports it and the operating environment includes a DMA driver (Win-
dows 95 OSR2 or a third-party IDE bus master driver). If your hard drive
and your system software both support Ultra DMA/33 and Ultra DMA/66
and Ultra DMA/100, select Auto to enable BIOS support. The settings
are: Auto (Default), Disabled.
USB Controller
Select enabled if your system contains a Universal Serial Bus (USB) 1.1
controller. The settings are: Enabled (Default), Disabled.
USB 2.0 Controller
Select enabled if your system contains a Universal Serial Bus (USB) 2.0
controller. The settings are: Enabled (Default), Disabled.
USB Keyboard Support
Select enabled if you use USB Keyboard in DOS mode. Enable (Default)
USB Mouse Support
Select enabled if you use USB Mouse in DOS mode. Disabled (Default)