User manual

33 Chapter 4
6. Check the Start watchdog service on boot to enable the Watchdog-
timer to start automatically after the system boots every time.
7. Click OK, then the configuration procedure is finished.
4.2.3 Dual Display Setting
If you use CRT monitor, you must Connections to CRT port in during
system boot up. During system boot up, the system will set CRT parame-
ter. If you have multiple devices, you can set them.
1. Click Intel graphic icon from the toolbars
Note Use advantech WDT Driver.WDT was enable,and
WDT LED was 1Hz glisten.