User manual

IPPC-6152A Series User Manual 20
3.1.4 CPU VCCA Power Select (JP2)
This jumper is used to select VCCA Power is +1.5V or +1.8V
3.1.5 Measure Battery Current Jumper (JP3)
This jumper is used measure batter curren
3.1.6 Clear CMOS (JP4)
This jumper is used to erase CMOS data and reset system BIOS
information. Follow the procedures below to clear the CMOS.
1. Turn off the system.
2. Close jumper JP1 (1-2).
3. Turn on the system. The CMOS is now cleared.
4. Turn on the system. The BIOS is reset to its default setting.
CPU VCCA POWER Selec JP2
+1.5V
+1.8V
Normal
Measure Current
Used series connection to
Current Meter measure
Clear CMOS JP4
Clear
Normal