User manual
11 Chapter 2
2.2 Installing SDRAM
You can install from 128 MB to 2 GB (x2) of DDR2 SDRAM memory.
The Panel PC system provides two DDR2 SDRAM sockets
1. Unlock the back cover and open it.
2. Push the two white eject levers on each side of the DIMM outward
until they are separated from the black vertical posts.
3. Insert the memory module into the socket at an angle of 90 degrees.
4. Push the two eject levers toward the vertical posts at each end of
the socket until the module is upright.
A
B