User manual

IPPC-6152A Series User Manual 8
Chapter 2 System Setup
2.1 General
Before you start the computer, please follow these procedures for set up:
1. Check and adjust jumpers on the motherboard (see Chapter 3)
2. Install DDR2 SDRAM
3. Install a CPU
4. Install add-on cards
5. Connect the wires, cables and accessories
6. Mount the computer
7. Program the BIOS settings
8. Install an operating system.
2.1.1 PS/2 Mouse & Keyboard
If you wish to use a full-size desktop keyboard and PS/2 mouse with your
panel PC, follow these instructions:
1. Be sure the panel PC is turned off.
2. Attach the keyboard adapter to the 5-pin green port on the rear bot-
tom side of the rear cover.
3. Attach the mouse adapter to the 5-pin purple port on the rear bot-
tom side of the rear cover.
Warning: 1. Switch off and unplug every time you access its interior.
2. The motherboard inside the system is composed of many
delicate ICs, chips and other integrated circuit components.
These components are easily damaged by static shock.
When you begin to install components, please:
- Avoid touching the metal parts of the motherboard.
- Use anti-static ring when handling CPU or SDRAM module.
- Put SDRAM modules and the CPU inside an anti-static bag
or a similar place before installation.