User manual

IPPC-7158 User Manual 12
2.2 Installing Optional Disk Drives
The IPPC-7158 provides spaces for one 3.5" hard disk drives, one CD-
ROM drive, & one 3.5" floppy disk drive within the chassis. Front-facing
FDD & CD-ROM have already been installed. You can access them after
opening the front LCD panel.
Below is the procedure of installing HDD and CD-ROM:
1. Unscrew the 3 screws and 4 screws on the side of the case to
remove the HDD Drive Bay
2. Unscrew the 4 Screws on the bottom of the drive bay to separate
the 2 parts.
3. Install HDD with 2 screws on each side.
4. Combine the 2 sheet metal parts of the drive bay with the screws
5. Installed the HDD drive bay finished (with CD-ROM).
2.3 Rack Mounting
The IPPC-7158B can be mounted to a 19" industrial rack.