User's Manual

Version
Displays the versions numbers of the various parts of
software and hardware on your Internet radio.
Upgrade Firmware
Use this option to download new firmware for the radio
from the Reciva portal on the Internet. If there is
new firmware available, then the radio will prompt you if
you want to download it or not. Note, at this
stage, you can press the radio’s BACK button to cancel the
radio beginning a firmware upgrade.
A Firmware upgrade may take several minutes, so
do not switch off the power to the radio until the
operation is complete otherwise the radio may
become permanently damaged.
Language
Allows you to change the display language.
Factory Reset
Puts all the settings back to their defaults as they were
when they left the factory. If you perform a factory
reset on your radio you will lose all your presets and your
wireless network connection.
Register
This will display a key that can be used to register the radio
on the Reciva Customer portal:
http://www.reciva.com/
Clock Setup
Use this option to set the time & the date.
Setting the clock
1. Press the SELECT button. (Note: if you make a mistake
at any point, press the BACK button to go back to the
previous screen.)
2. Turn the knob until the display says <Configure>.
3. Press the SELECT button.
4. Turn the knob until the display says <Clock Setup>.
5. Press the SELECT button.The display says <Set
Time/Date>.
6. Press the SELECT button.
7. Turn the knob until the hour setting is correct, then
press the SELECT button.
8. Turn the knob until the minute setting is correct, then
press the SELECT button.
9.Set the Date as below
The display says ‘Time and Date Set’ message for 3 seconds,
then returns to ‘ Set Time/Date’ menu.
Set Time
14 : 03
English
22
Configure menu
Set Time
15
: 03
Set Time
15 : 06
Set Date
20
Sep 2007
Configure
Clock Setup
Set Time / Date