User Manual

6. NUMBER BUTTONS: Selects channels directly on the TV.
7. 100: Selects channels over 100. For example, to select channel
121, press “+100,” then press “2” and “1.”
8. PRE: Moves to the previous channel.
9. MENU: Displays the OSD menu.
10. PICTURE: Configures various video modes.
11. SOUND: Configures various sound modes.
12. VOLUME (-/+): Increases or decreases the volume.
13. CHANNEL (?/?): Changes channels.
14. ASPEC: Changes the screen size.
15. EXIT: Cancels the current configuration.
16. STILL: Freezes a moving picture on the screen.
17. SOURCE: Selects the signal source for the PIP window.
18. SOUND: Exchanges the audio signal source of the main screen and the PIP window.
19. SWAP: Exchanges the video signal source of the main screen and the PIP window.
20. ROTATION: Selects the location of the PIP window.
21. CHANNEL (?/?): Selects the channel of the PIP window.
22. PIP: Switches PIP windows.
23. SCAN: Scans all channels automatically.
24. ADD: Adds a channel.
25. ERASE: Erases a channel.
26. CAPTION: Turns captions on or off (Caption boroadcast).
27. MTS: Selects stereo, mono or Separate Audio Program (SAP broadcast).
28. SLEEP: Selects a preset time interval for automatic shutoff.
29. DISPLAY: Displays the current channel and the audio-video settings.
.
12P
Before Using the TV
Installing Batteries in the Remote Control
1. Slide the cover out by pressing the ? part of the cover.
2. Install two AAA size batteries according to the correct polarity.
3. Close the cover in the arrow direction.
Using the Remote Control
The remote control works properly for the following operational range.