User Manual

should take into account the following conditions.
- They have to comply with VESA Mount Interface 100mm standard.
- They have to able to sustain the weight of the LCD TV.
- They have to be fixed to a position adjustable by hand.
- They have to be adjustable.
- The distance between the screw holes for fixing the arms has to be 100mm.
Additionally, refer to the installation manual supplied with the arms for installation.
Arm installation procedures
Install the arms following the procedures given below.
1. Remove all cables connected to the TV.
2. Lay the LCD TV face down on a flat surface with a cushion or some type of soft
material to protect the screen.
3. Using a screwdriver, remove the screws fixing the stand.
4. Install the steel frame of the arms, insert the attached screws into the screw holes
of the LCD TV, and then fasten the screws using a screwdriver.
? Attach the arm to the fixed board first.
? Do not use the handle screws for fixing the stand and the handle screws to fix the arms.
Use only the screws attached for the arms (M4 x 10 screws with a diameter of 4 mm,
and a length of 10 mm). If you use the stand screws to fix the arms, the TV may be fall
and get damaged, because the arms are not fixed completely.
To reattach the removed stand, use the stand screws.
? Attach the arms completely.
If the TV becomes detached from the arms, it may cause injury or damage the product.
If the TV is somehow detached accidentally, unplug the power cable from the wall outlet,
and contact your service center.
Damage may cause fire or electric shock.
8P
Using Securely
?Maintenance of the Exterior Cabinet
? Do not clean the surface of the cabinet with benzene or paint thinner, and do not spray
volatile matter such as insecticides on the surface. This may harm the coating on the
surface.
? When you clean the cabinet with a chemically treated cloth, please follow the
instructions carefully for that product.
? Clean the stains on the cabinet and the operation panel using a soft cloth.
For severe stains, clean the stains with a cloth damped with diluted mild detergent, and
then finish by cleaning the cabinet with a dry cloth.
? Do not use the following detergents to avoid harming the coating of the surface.