User Manual

4. Press the「EXIT」button to exit the menu.
56P
Operation
Auto Set
You can adjust the frequency and the phase of the PC screen automatically.
1. Press the 「MENU」button.
The OSD MENU will be displayed.
2. Select PC SETUP using the 「CHANNEL?/?」buttons and then press
the「VOL+」button.
3. Select AUTOSET using the 「CHANNEL?/?」button and then select using
the 「VOL+」button.
The PC screen is adjusted automatically.
4. Press the「EXIT」button to exit the menu.
57P
Trobleshooting
If the TV seems to have a problem, first try the following list of possible problems and
solutions before contacting a service center.
If none of these troubleshooting tips apply, do not attempt to repair the product yourself.
Call your nearest service center.
Symptoms that may appear to be a problem
The following symptoms may happen even if the TV has no problem. First try the
following list of possible problems and solutions before contacting a service center.
Symptom Possible Problem Possible Solution
No picture on the
screen, and the power
LED does not turn on.
Power connection
problem.
Check the power cable
connectivity to the power
connector. Press the power switch
again.