User Manual

4. Press the「EXIT」button to exit the menu.
52P
Operation
?
Adjusting the Phase
1.Press the 「MENU」button.
The OSD MENU will be displayed.
2. Select PC SETUP using the 「CHANNEL?/?」buttons and then press
the「VOL+」button.
3. Select PHASE using the 「CHANNEL?/?」button and then adjust the phase
using the 「VOL+」button.
During the adjustment, an additional adjustment window will be displayed.
4. Press the「EXIT」button to exit the menu.
53P
Operation
Adjusting the Picture Position
If the picture is not centered in the screen, adjust the picture position by
completing the following procedures.
?
Adjusting the Horizontal Position
1. Press the 「MENU」button.
The OSD MENU will be displayed.
2. Select PC SETUP using the 「CHANNEL?/?」buttons and then press
the「VOL+」button.