User Manual

The PIP SETUP menu will be displayed.
4. Select PIP ON/OFF using the「CHANNEL?/?」button and then press the
「VOL+」button.
Select ON using the「CHANNEL?/?」button.
Whenever you press this
button, PIP mode is turned either on or off.
Selecting OFF turns off PIP mode.
5. Press the「EXIT」button to exit the menu.
Note
? Since this product has a single tuner, you cannot watch two TV channels simultaneusly
in PIP mode.
? You can only listen to one sound output from either the main screen or the PIP window.
? Refer to the PIP configuration table (Page 65).
36P
Operation
Changing the Source of the PIP Window
You can change the video souce of the PIP window from any externally connected devices.
? Pressing the SOURCE button.
Whenever you press this button, the source of the PIP window is changed to the next
video signal of an externally connected device, in that order.
1.Press the 「MENU」button.
The OSD MENU will be displayed.
2. Select FUNCTION SETUP using the「CHANNEL?/?」button and then press
the
「
VOL+
」
button.
3. Select PIP SETUP using the「CHANNEL?/?」button and then press the
「VOL+」button.
The PIP SETUP menu will be displayed.
4. Select PIP SOURCE using the「CHANNEL?/?」button and then press the
「VOL+」button.
Select the desired external input signal.
Whenever you press this button, the video source is changed in the following order.