User Manual

The MENU will be displayed.
2. Select CHANNEL SETUP using the「CHANNEL?/?」button and then press
the 「VOL+」button.
3. Select ADD/ERASE using the「CHANNEL?/?」button and then press the
「VOL+」button.
Adding a channel
4. Select a channel to add using the「CHANNEL?/?」button and then press
the 「VOL+」button.
The OSD changes from ADD to – -- .
Deleting a channel
5. Select a channel to delete using the「CHANNEL?/?」button and then press
the 「VOL+」button.
The OSD changes from – to ADD.
Complete steps 4~5.
26P
Procedures for Using the TV
Changing Channel
You can change channels on your LCD TV by using the CHANNEL ?/? buttons, or
by direct selection using number buttons. You can use the number buttons to tune to
any channel (even one that has been erased or has not been memorized).
Using the CHANNEL buttons
Press the CHANNEL ?/? buttons to change channels.
The TV changes each channel in order, up or down, depending on which button you
press. You will see all the channels that the TV has memorized.(The TV must have
memorized at least three channels.) You will not see channels that were not
memorized or have been erased.
Using the NUMBER buttons
To change to single-digit channels(0~9) faster, press “0 ” before the single digit.
Example : For channel 4, press “0 ”,then “4 ”.
To select a channel over 100, press the 100, press the 100 button first.