User Manual

cableTV receiver using the video/audio cables. (Connect the cable to the terminal of the
same color).
Procedures to Watch Cable TV
1. Turn the TV on, and select 'VIDEO' using the TV/VIDEO button on the remote control.
2. Turn the cable TV receiver on and select the desired channel using the remote control
of the receiver.
19P
Connections
Connecting the Antenna Input Jack
Connection Procedures
1. Connect the cableTV antenna cable to the ANTENNA IN jack on the back of the cable
TV receiver.
2. Connect a coaxial cable between the ANTENNA INPUT jack of the TV and the antenna
output jack of the cable TV receiver.
Procedures for watching Cable TV
1. Set the channel select switch on the back of the cable TV receiver to 3 or 4.
2. Turn the TV on and change the TV channel to 3 or 4 according to the selection of the
channel select switch.
3. Turn the cable TV receiver on and select the desired channel using the remote control
of the cable TV receiver.
20P
Procedures for Using the TV
Check Before Using
Please check the following check list before using the TV.
1. Is the antenna cable connected properly?
2. Is the AC adapter connected properly?
When you connect the adapter to the unit, turn the power switch on the front panel
to “off”, and then connect the adapter cable.
When not using the adapter for a long time period, separate the AC adapter from
both the main body and the power outlet on the wall.