User Manual

? If your VCR does not support stereo sound, connect the mono audio out jack to the
AUDIO INPUT (left) jack.
Procedures for watching a video over a VCR
1. Turn the TV on, and select 'VIDEO' using the TV/VIDEO button on the remote control.
? If you have connected a S-VIDEO cable, select 'SVHS'.
2. Turn the VCR on, insert the tape, and press the Play button.
15P
Connections
Connecting the Antenna Input Jack
Connection Procedures
1. Connect the antenna cable to the ANTENNA IN terminal on the back of the VCR.
2. Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the
antenna terminal on the TV.
Procedures for watching a Video over a VCR
1. Set the channel select switch on the back of the video to 3 or 4.
2. Change the TV channel to 3 or 4 according to your selection of the channel select
switch.
3. Turn the VCR on, insert the tape and press the Play button.
16P
Connections
Connecting a DTV
Connection Procedures
1. Connect the COMPONENT VIDEO INPUT jack on the TV and the component video