Specifications

Specifications
We follow a policy of continuous advancement in
development.
For this reason all or part of specifications & designs
may be changed without prior notice.
11
DLS Reference RA10
Number of channels 1
Working mode AB
Power output at 13,8 Volt, max 0,1 % THD
Power output in 4 ohm 300 W
Power output in 2 ohm 500 W
Power output in 1 ohm 780 W
THD @1 W < 0,1%
Signal to noise ratio, A-weighted >100 dB
Damping factor >200
Frequency response +/- 3 dB 10 Hz - 125 Hz
Input impedance, low level >10 kohm
Input impedance, high level 330 ohm
High level input with auto start Yes
Input sensitivity 0,5 - 8V
Filter slope LP-filter 12 dB / octave
Filter slope subsonic filter 18 dB / octave
Pre amp configuration:
Filter lowpass 40 - 125 Hz
Fixed 25 Hz subsonic filter Yes*
Phase shift 0- 180 degrees continously Yes
Grand bass adjustable gain @ 40 Hz 0 - 18 dB
Remote bass level and phase control Yes*
* can be switched in/out
Protection current, DC-offset & thermal
Max cable size, DC input 4 AWG, 21 mm
2
Max cable size, speaker terminal 7 AWG, 10 mm
2
Power consumption:
Idle 0,6 A
Maximum 120 A
Fuse 4 x 30 A
Dimensions HxWxD(mm) 59 x 359 x 245
Dimensions (inch) 2,33x14,13x9,65
Weight 4,3 kg(9,5 lbs)
RA10