Technical data

TECHNICAL REFERENCE MANUAL
10 Safety instructions
The following directions should enable the person responsible for the DLS-A(H), and the user of the instrument,
to anticipate and avoid operational hazards.
The DLS-A(H) is made to be integrated into technical systems. A basic technical education is therefore essential.
This device may only be operated by trained persons.
The person responsible for the instrument must ensure that all users understand these directions and adhere to
them.
If the DLS-A(H) is part of a system, the manufacturer of such a system is responsible for all safety-relevant issues,
such as the manual, labeling and instruction.
10.1 Use of the instrument
Permitted use:
The permitted use of the DLS-A(H) is: measuring distances.
Prohibited use:
1) Using the instrument without instruction
2) Using outside the stated limits
3) Deactivation of safety systems and removal of explanatory and hazard labels
4) Opening of the equipment, except to open the cover for access to the screw terminal
5) Carrying out modification or conversion of the product
6) Operation after failure in operation
7) Use of accessories from other manufacturers without the express approval of Dimetix.
8) Aiming directly into the sun
9) Deliberate dazzling of third parties; also in the dark
10) Inadequate safeguards at the surveying site (e.g. when measuring on roads, etc.)
WARNING
Prohibited use can lead to injury, malfunction, and material damage. It is the duty of the person responsible for
the instrument to inform the user about hazards and how to counteract them. The DLS-A(H) must not be
operated until the user has been adequately instructed.
Distance Laser Sensor Page 34/40