Technical data

TECHNICAL REFERENCE MANUAL
1 Introduction
The DLS-A(H) is a powerful distance measuring instrument for integration into industrial applications. It allows
accurate and contact-less distance measurement over a wide range using the reflection of a laser beam:
Key features
• Measurement range 0.2 to 200 m
• Serial interface (RS232 and RS422)
• Connection of up to 10 modules on a single RS422 line
• Wide range power supply (9...30VDC)
• Programmable analog output (0/4...20mA)
• Two programmable digital outputs
• Digital output for error signalization
• D-Sub connector and screw terminal joint for easy connection
• Adapter for telescopic viewer for easy installation
• IP65 (protected against ingress of dust and water)
• 4 LEDs for status signaling
• Complementary configuration software available at Dimetix web site (www.dimetix.com)
• Optional: Internal heater for module operation down to -40°C
• Laser class II (<0.95mW)
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Distance Laser Sensor Page 3/40
Fig. 1 Standard application
Measured distance
Tar get
Measuring reference