Specifications

TECHNICAL SPECIFICATIONES OF DLS AMPLIFIERS
MODEL DS 100/Reference 100 DQ 200/Reference 200
Number of channels 2 4
Mode AB AB
RMS output power at 13,5 VDC, 20 Hz - 20 kHz, max 0,1% THD:
4 ohm nominal power 2 x 50 Watts 4 x 50 Watts
4 ohm max effekt 2 x 65 Watts 4 x 60 Watts
2 ohm max effekt 2 x 100 Watts 4 x 80 Watts
Bryggkoppling 4 ohm 220 Watts 2 x 180 Watts
THD < 0,1% < 0,1%
S/N ratio, A-weighted > 100 dB > 100 dB
Damping factor > 200 > 200
Input impedance 15 kohm 15 kohm
Input sensitivity 0,3 - 5,5 volt 0,3 - 5,5 volt
Filter highpass 15 - 200 Hz 15 - 200 Hz
Filter lowpass 50 - 200 Hz* 50 - 200 Hz*
* Can be switched in/out
Filter slope 12 dB/octave 12 dB/octave
Fuses 25 A x 2 25 A x 2
Max power cable area power: 16 mm
2
16 mm
2
Max speaker cable area 6 mm
2
6 mm
2
Protection circuits Current and thermal Current and thermal
Power consumption:
Idle 0,7 A 1,0 A
Max consumption 37 A 55 A
Remote 26 mA 26 mA
Dimensions:
Width 290 mm 400 mm
Heigth 65 mm 65 mm
Depth 240 mm 240 mm
Weigth 4 kg 5,4 kg
DLS SOUND HANDBOOK - DLS AMPLIFIER SPECIFICATIONS
Recommended cable size for the DC-feed.
Cable length: < 1,5 m 1,5 - 5 m > 5 m
Amplifier:
DS 100 10 mm
2
16 mm
2
21 mm
2
DQ 200 16 mm
2
21 mm
2
33 mm
2
Recommended main fuse:
Amplifier Fuse Fuse holder
DS 100 AGU 40 A FH1/FH1B
DQ 200 AGU 60 A FH1/FH1B
7