System information

Program 90 : Maintenance Program
90-34 : Firmware Information
960 ◆ Programming UX5000 Software Program Manual
90-34 : Firmware Information
Description
Use Program 90-34 : Firmware Information to check the firmware information for each installed
blade in the UX5000.
Input Data
Conditions
None
Feature Cross Reference
Maintenance
Terminal Programming Instructions
To enter data for Program 90-34 (Firmware Information):
1. Enter the programming mode.
2. 90 34
3. Enter the number of the item you want to program.
4. Enter the Slot number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Level:
Feature Availability
IN • Available.
Slot Number 01-24
Item
No.
Item Display Data Data Format
01 Blade Name Blade Name -
02 Firmware Version Number 00.00 ~ 15.15 BCD Code (1 Byte)
90-34-01 Slot No 1
PKG Name Not Installed
back
↑ ↓ select
90-34-nn Slot No n
nnnnn
← −1 +1 →