System information

Program 90 : Maintenance Program
90-19 : Dial Block Release
UX5000 Software Program Manual Programming ◆ 945
90-19 : Dial Block Release
Description
When the extension number is entered in Program 90-19 : Dial Block Release, the extension will
be released from the Dial Block restriction.
Input Data
Conditions
This program is only available in terminal and WebPro programming.
Feature Cross Reference
● Toll Restriction
Terminal Programming Instructions
To enter data for Program 90-19 (Dial Block Release):
1. Enter the programming mode.
2. 90 19
3. Enter the number of the item you want to program.
4. Enter the extension number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Level:
Feature Availability
IN • Available.
Extension Number Up to 8 digits
Item No. Item Input Data
01 Dial Block Release [Release?] : Dial 1 and press HOLD
(Press only HOLD key for cancel)
90-19-01 TEL301
CLR Dial Block
back
↑ ↓ select
90-19-nn TELnnn
nnnnn
← − + →