System information

Program 90 : Maintenance Program
90-13 : System Information Output
UX5000 Software Program Manual Programming ◆ 941
90-13 : System Information Output
Description
Use Program 90-13 : System Information Output to define the output port to be used as the sys-
tem information output. The baud rate for the COM port should be set in Program 10-21-02.
Input Data
Conditions
None
Feature Cross Reference
None
Level:
Feature Availability
IN • Available.
Item No. Item Input Data Default
01 Output Port Type
Indicate the type of connection used
to print the system information.
0 = No setting
1 = -- Reserve –
2 = -- Reserve –
3 = -- Reserve –
4 = CTA/CTU (for Aspire
Keysets Only)
5 = USB port (CPU)
0
02 Destination Extension Number
If the output port type (item 1) is set
to CTA/CTU, enter the extension
number (Aspire keyset) with the
CTA/CTU connection.
Extension Number
(Up to 8 digits)
No setting
03 - Not Used - --
04 Output Destination System ID
Define the system ID of the UX5000
to which the data will be outputted.
0-50 0
05 Output Command
Dialing 1 from this program sends
the system report to the connected
USB device on the CPU.
Dial 1 and press HOLD
(Press only HOLD key for cancel)
-