System information

Program 90 : Maintenance Program
90-03 : Save Data
918 ◆ Programming UX5000 Software Program Manual
90-03 : Save Data
Description
Use Program 90-03 : Save Data to save the programmed data on the SRAM and Flash ROM to the
16M ATA Removable Compact Flash Memory card. This program should be used after changing
the programmed data.
Input Data
Conditions
● When reloading a customer database, the UX5000 must be reset (either using Program 90-08
or power down/power up) before all uploaded programming will take affect.
● This program is only available in terminal programming.
Feature Cross Reference
None
Terminal Programming Instructions
To enter data for Program 90-03 (Save Data):
1. Enter the programming mode.
2. 90 03
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
Level:
Feature Availability
SA • Available.
Item No. Item Input Data
01 Save Data Dial 1 and HOLD (Press only HOLD key to cancel)
90-03-01
Data Save YES:1
back
↑ ↓ select
90-03-nn
nnnnn
← →