System information

Program 90 : Maintenance Program
90-02 : Setting the Programming Password
UX5000 Software Program Manual Programming ◆ 917
Default
Conditions
More than one extension can be in the programming mode.
Feature Cross Reference
None
Terminal Programming Instructions
To enter data for Program 90-02 (Setting the Programming Password):
1. Enter the programming mode.
2. 90 02
3. Enter the number of the item you want to program.
4. Enter the User number to be defined or press FLASH to use the displayed entry.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press MIC once to enter a new item number.
OR
Press MIC until you’ve exited that series’s programming section.
User No. User Name Password Level Level Description
2 UX5000 12345678 2 (IN) Installer Level - Access to all
programs IN level programs
3 ADMIN1 0000 3 (SA) System Administrator Level
1 - Restricted access
4 ADMIN2 9999 4 (SB) System Administrator Level
2 - More restricted access
5 USER1 1111 5 (UA) User Programming
Administrator Level
6 -- Not Used -- -- Not Used -- -
7 -- Not Used -- -- Not Used -- -
8 -- Not Used -- -- Not Used -- -
90-02-01 User1
User name -NEC-I
back
↑ ↓ select
90-02-nn Usern
nnnnn
← − + →